Red 01SS

iTrader: (2)

I know its nothing new, same pic we have seen 1000 times but I was happy with the turnout so...

Here is the most recent mod, relocated the hood latch cable and took off those ugly stickers.

I think it looks much better now

bene

iTrader: (16)

Where did you guys put the cable?

Brian2006

iTrader: (42)

Looks good! Now you just need to relocate the ground and do the wire mod!

Red 01SS

iTrader: (2)

I thought about drilling that hole biger but I ended up running it down and around the wheelwell (that 1 word? sp?)

Brian, where did you put the ground? Also, the wire mod is next on my list, just didnt feel like messing with it today lol.

djfury05

iTrader: (30)

thread from the dead.. wheres the ground go lol?

Spd-Kilz

iTrader: (35)

There is a small hole behind the wheel well. Drill it out a little bigger. The cable runs between the wheel well and the black plastic guard in the wheel well. Comes out by all the fuses.

joker machine

This is new to me,so to relocate the hood latch cable you drill a hole? Like the wire mod?

Spd-Kilz

iTrader: (35)

Essentially the same thing. But you just need a drill bit. There is already a tiny hole on your car. Just drill it bigger and run the wire through!

chevroletfreak

iTrader: (6)

I did not drill anything on mine. I just ran it under the master cyl and around the wheel well next to the main wire harness.