push button start? asr?
#1
On The Tree
Thread Starter
Join Date: Mar 2006
Location: oakland,CA
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
push button start? asr?
ok, so i did a search on this and found some good info but i was wondering if anyone had added a switch for ignition and then used the asr button to start the car. and what kind of swicth would i need to replace the asr button. any feed back would be great. thanks
#2
TECH Resident
iTrader: (21)
Join Date: Sep 2005
Location: New Jersey
Posts: 820
Likes: 0
Received 0 Likes
on
0 Posts
get another ASR switch or Fog Light switch and throw it in that panel. The "CAMARO" panel comes out and gives you two more slots. You can take the switches apart and bend the metal tab inside of it to change it from on/off to momentary or vise versa. I used an ASR switch and turned it into an on/off switch for my amp remote wire, plus found a wire behind there that's only on when ignition is on so if I leave the switch on my amp won't drain my battery
#3
On The Tree
Thread Starter
Join Date: Mar 2006
Location: oakland,CA
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
ok so i decided to use the honda pushbutton switch out of the s2000 but i have never done anything like this before. so if anyone has a step by step for the whole install that would be great.
Trending Topics
#12
i did this in my vr4 but used the cigarette lighter, i took it out and drilled a hole in the bottom and put a momentary switch underneath the cigarette lighter, so to start the car all you had to do was push the cigarette lighter, pretty trick