Need opions on grille...
Third Chrome Wheel Director
iTrader: (1)
Joined: Jul 2002
Posts: 764
Likes: 0
From: North West Houston
Re: Need opions on grill... How about the SLP SS grille WITH (Inexpensive, but quality) McMaster-Carr stainless steel mesh, polished of course.......
oh, and you don't want a grill....like this...
you want a grille!..... :p
oh, and you don't want a grill....like this...
you want a grille!..... :p
Re: Need opions on grill... Pewtery2k- That is the grille that I was original looking at... but I dont know what it would go with... my rims are chrome 
if I get polished it would be the only polished piece on my car.
Blue Beast- That set up looks nice
Where did you get the stainless steel mesh from?
Keep the comments coming
if I get polished it would be the only polished piece on my car.Blue Beast- That set up looks nice
Where did you get the stainless steel mesh from?Keep the comments coming
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Launching!
Joined: Jun 2003
Posts: 249
Likes: 0
From: texas unfortunately for now
Re: Need opions on grill... steve2000SS ive got the same grill with the emblems and i think it looks ill. help me talk these guys out of buying that cheese billet grill no offence but i think it looks like ***.
Re: Need opions on grille... Yes...but plastic grills are just that...plastic. God knows, the last thing our cars need is MORE cheap *** plastic on them.
Plastic dash, plastic console, plastic speaker panels, plastic trunk cover, plastic t-top holders, plastic radiator covers...."Hey! why don't I spend $200+ on a $15 injection molded plastic grill piece to replace the stock PLASTIC piece.
No thanks...I think I'll stick to my "truck" grill.
Plastic dash, plastic console, plastic speaker panels, plastic trunk cover, plastic t-top holders, plastic radiator covers...."Hey! why don't I spend $200+ on a $15 injection molded plastic grill piece to replace the stock PLASTIC piece.
No thanks...I think I'll stick to my "truck" grill.
Re: Need opions on grille... Corvettes are plastic, and are much nicer than our F-bodies inside/out. Truck grilles make these plastic f-bodies look even cheaper :p
Next up, f-body gun racks and step bars! lol
Tony
Next up, f-body gun racks and step bars! lol
Tony
Re: Need opions on grill... 
I also added stainless mesh to my SLP SS grille. I measured the mesh size from the front of a Z06 and ordered the mesh from McMaster-Carr. This may be the coolest company in the world!
I epoxied a piece of polyurethane (also from McMaster-Carr) between the openings of the SLP grille. I drilled 2 holes in the polyurethane and attached the mesh with stainless bolts, nylok nuts, and fender washers. I then trimmed the mesh with a cut wheel. Looks great, will never rust!
McMaster-Carr Third Chrome Wheel Director
iTrader: (1)
Joined: Jul 2002
Posts: 764
Likes: 0
From: North West Houston
Re: Need opions on grill... Lawman.....that looks fantastic!!.......I agree that McMaster-Carr is one of the best companys I have ever ordered from......my sheet of steel was $11 shipped to my door and I had it in one day!, fantastic shipping and service for such a small order.....
for everyones benifit, if they want to use the same mesh, what was your part number?....
mine was part number.... 9319 T524 , I assume that yours was a tighter "weave" on the steel by the looks of it?...and what a great way of installation too!....great to see MODs evolve.......any close up pics of the mesh Lawman?
for everyones benifit, if they want to use the same mesh, what was your part number?....
mine was part number.... 9319 T524 , I assume that yours was a tighter "weave" on the steel by the looks of it?...and what a great way of installation too!....great to see MODs evolve.......any close up pics of the mesh Lawman?
Re: Need opions on grill... Blu,
Thanks!
The McMaster part number is 9319T532 (type 316 S/S woven wire cloth, 6x6 mesh, .035" wire dia, 12x12 sheet, $16.20/ea)
The Polyurethane # is 8631K211 (black poly, 3/4" x 3/4" square, 24" long, 90A durometer, $24.31/ea)
As I said earlier, I tried to get the mesh size as close to that of a Z06. I ordered two sheets, but only needed one to do both openings on the SLP grille. I also ordered more polyurethane than I needed, but the extra has come in handy. It's crazy, I ordered online at 4:30 on a Thursday afternoon, the mesh was on my doorstep Friday! Here's the only close shot I have of the mesh:
Hope this helps!
Thanks!
The McMaster part number is 9319T532 (type 316 S/S woven wire cloth, 6x6 mesh, .035" wire dia, 12x12 sheet, $16.20/ea)
The Polyurethane # is 8631K211 (black poly, 3/4" x 3/4" square, 24" long, 90A durometer, $24.31/ea)
As I said earlier, I tried to get the mesh size as close to that of a Z06. I ordered two sheets, but only needed one to do both openings on the SLP grille. I also ordered more polyurethane than I needed, but the extra has come in handy. It's crazy, I ordered online at 4:30 on a Thursday afternoon, the mesh was on my doorstep Friday! Here's the only close shot I have of the mesh:
Hope this helps!