Appearance & Detailing Interior & Exterior Appearance Modifications

how to hide the wires

Old Jul 19, 2003 | 12:24 PM
  #1  
BYBYC5's Avatar
Thread Starter
*Bad Trader*
 
Joined: Nov 2001
Posts: 1,459
Likes: 0
From: here and there
Default how to hide the wires

how did you guys hide the wire harnes that lays accross the strut towers???
Reply
Old Jul 19, 2003 | 01:15 PM
  #2  
Poltergeist's Avatar
TECH Enthusiast
 
Joined: Nov 2001
Posts: 554
Likes: 0
From: Ontario Calif.
Default Re: how to hide the wires

This is the way Steve and I first came up with it. Wire Delete A few others have come up with some different ways. They may chime in or you can do a search.
Reply
Old Jul 19, 2003 | 01:24 PM
  #3  
bigMAC's Avatar
TECH Enthusiast
 
Joined: Oct 2002
Posts: 553
Likes: 0
From: Long Island, NY
Default Re: how to hide the wires

I just attempted this but fucked up pretty bad. I stopped after the first harness and then tried to put it back to stock using butt connectors instead of soldering the wires. The wires are all connected rightn atleast I think they are. I started the car and my traction control doesn't work, my ses light is on and when I change gears in my a4 like putting in drive or something it like kicks. I reset the computer and it does the same thing except now there is no power. I can be at WOT and it shifts at like 2500 rpm. I hope it is just the computer relearning that is causing the lose in power. Any ideas. I also took apart my maf to polish the ends and put it back together right I didn't touch the little wires or try and port and descreen it but maybe that is the cause of some this. Please help me.
Reply
Old Jul 20, 2003 | 09:02 PM
  #4  
Kobwo's Avatar
Launching!
 
Joined: Jan 2002
Posts: 244
Likes: 0
From: Wichita Falls, Texas
Default Re: how to hide the wires

I just attempted this but fucked up pretty bad. I stopped after the first harness and then tried to put it back to stock using butt connectors instead of soldering the wires. The wires are all connected rightn atleast I think they are. I started the car and my traction control doesn't work, my ses light is on and when I change gears in my a4 like putting in drive or something it like kicks. I reset the computer and it does the same thing except now there is no power. I can be at WOT and it shifts at like 2500 rpm. I hope it is just the computer relearning that is causing the lose in power. Any ideas. I also took apart my maf to polish the ends and put it back together right I didn't touch the little wires or try and port and descreen it but maybe that is the cause of some this. Please help me.
I did this delete and had no probs. Retrace your wires to make sure that they are connected correctly. Don't assume they are.
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:27 PM.