how are frc's attached
 

how are frc's attached to the engine, i just bought some from a member and waiting for delivery

http://img2.putfile.com/main/6/18023485987.jpg

If you look at your coil packs the bottom bolt on 3 out of the 4 on each side holding them on looks like a pointed stud...the covers snap on to those and then snap on to your fuel rail at the top. Very simple install except for all the pieces you have to squeeze them around and under to get them on. Plus your going to have to cut the hell out of those to get them to fit....cut a little and test fit, dont try to cut it all at once!

i heard you only cut if you have the AIR in there, mine is out

I am not sure about that....maybe you wont have to cut the backs, but I know you will have to cut where the thottle cable bracket is.

do you have close up oF pics of yours

This is the only one even close to showing the cut for the TB cable. The TB cover hides it but you can see where the corner had to be cut.

http://i183.photobucket.com/albums/x...t/DSC02809.jpg

oh, i see thx

hopefully thats it

does the cable go above the frc's

Yeah, and here is a better pic without the STB and all in the way...

http://i183.photobucket.com/albums/x...t/DSC03015.jpg

perfect thx a lot

you dont have TCS do you?

i have it so i only have one TB cable.... hopefully i dont have to cut a lot

Right, no TCS. But I did have it on my Firehawk and I still had to cut them some. I think the bracket is the same size...just no cable there.

what did you use to cut it

im sure a dremel would work?

Yeah, a dremel with a plastic cut off wheel.

If you know anyone that has a scroll saw, that works waaayy easier. Just go little by little. It took me around 1.5 hours maybe to fit them both. Quite a bit has to come off from one. I'll take some pictures of mine, removed for you if you'd like.

pls if you would rick, thx

dude, i thought i was doing it for you??? i can use my dremel and cutoff wheel to do it, like i did with mine. you dont need to cut off as much as everyone else...look at mine
http://i251.photobucket.com/albums/g...maro/badge.jpg

oh and whats up with the corvette 427? very strange considering those are for an LS1.

427:secret2:

where????:secret2::secret2::secret2: