Anyone installed white guage faces?
Thread Starter
TECH Fanatic
Joined: Nov 2002
Posts: 1,248
Likes: 0
From: Oklahoma
Anyone installed white guage faces? I need any tidbits of advice that you might have on installing white cluster faces. I have read a few articals, but they look to be written by robots. "Take your time and it will be easy" type stuff that doesnt help at all.
Anything I should know/do/get before I go at it?
Thanks!
Anything I should know/do/get before I go at it?
Thanks!
TECH Enthusiast
Joined: Mar 2003
Posts: 740
Likes: 0
From: Pearland, Texas
Re: Anyone installed white guage faces? 1 tip: go ahead and drop your steering column before you begin - gives you more room to work. What type of gauges are you wanting to install??
Overlays or complete gauges where you need to remove the needles??
Overlays or complete gauges where you need to remove the needles??
TECH Enthusiast
Joined: Mar 2003
Posts: 740
Likes: 0
From: Pearland, Texas
Re: Anyone installed white guage faces? do the switch with your car warmed up - not cold. make sure to take notes of your gauges (where all needles are) before you remove them. Easiest if gas is either full or 1/2 full. Just so you know it won't be off. Make a note of where your rpm's are at a certain speed to compare once needles are back on.
Re: Anyone installed white guage faces? I've got a small write up on my site....just follow the link on my homepage: How to install W-F gauges
www.ebbsnflows.cz28.com
www.ebbsnflows.cz28.com
