Tint plus dot matrix??
#1
TECH Resident
Thread Starter
iTrader: (2)
Join Date: Mar 2006
Location: England
Posts: 899
Likes: 0
Received 0 Likes
on
0 Posts
Tint plus dot matrix??
Hi,
So I've finally decided to get the windows tinted, and after searching on here about the dot matrix, decided to spray paint the dots.
Well the matrix turned out awsome, I used 'Plasti coat' black spray paint.
1. When they do the tint, should I ask them to tint upto the paint, or just lip slightly over the paint?
2. How easy do the front windows damage the tint with the up & down motion?
Thanks for the advise.
So I've finally decided to get the windows tinted, and after searching on here about the dot matrix, decided to spray paint the dots.
Well the matrix turned out awsome, I used 'Plasti coat' black spray paint.
1. When they do the tint, should I ask them to tint upto the paint, or just lip slightly over the paint?
2. How easy do the front windows damage the tint with the up & down motion?
Thanks for the advise.
#3
TECH Resident
Thread Starter
iTrader: (2)
Join Date: Mar 2006
Location: England
Posts: 899
Likes: 0
Received 0 Likes
on
0 Posts
Great, Yes, I too have seen plenty of bubbled tints around the heavy matrix area.
How easy do the front windows damage the tint with the up & down motion?
Last edited by taws6; 09-20-2008 at 02:22 PM. Reason: added
Trending Topics
#8
TECH Resident
Thread Starter
iTrader: (2)
Join Date: Mar 2006
Location: England
Posts: 899
Likes: 0
Received 0 Likes
on
0 Posts
The front tint doesn't get damaged unless the fabric pads come off inside the door.
I guess my friend has had the pads come off his, as they are scratched bad. I will let him know, thanks.
#11
TECH Regular
iTrader: (1)
Join Date: Nov 2005
Location: Maryville,Tn
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
it has cured up a lot. I took this picture the day it got tinted. But it still makes me want to somehow get it perfect. Would cutting the tint off to the bottom of the matrix and then adding black vinyl work?
#13
TECH Resident
Thread Starter
iTrader: (2)
Join Date: Mar 2006
Location: England
Posts: 899
Likes: 0
Received 0 Likes
on
0 Posts
I dont know how good vinyl looks, but if I was you, I'd cut it off, and spray it black.
I am amazed how good it looks. ' SS LS1 ' has some pics on here of his matrix painted. Check them out, as I'm sure you'll agree when you see them, it looks flawless, and it's easy to do!
I am amazed how good it looks. ' SS LS1 ' has some pics on here of his matrix painted. Check them out, as I'm sure you'll agree when you see them, it looks flawless, and it's easy to do!
#15
TECH Fanatic
iTrader: (1)
Join Date: Jul 2003
Location: edison, nj
Posts: 1,095
Likes: 0
Received 0 Likes
on
0 Posts
yea i have the same issue and looks just like the pics you posted, they did use black vinyl on the outside of the car(looked ok for me,was done good) but the sun has taken its toll on it and needs to come off. Looking into painting it like the rest of you guys... glad to hear paint works.
#18
TECH Apprentice
Join Date: Nov 2004
Location: Kitchener, Ontario, Canada
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts