Appearance & Detailing Interior & Exterior Appearance Modifications

Door Panel Write Up

Thread Tools
 
Search this Thread
 
Old Oct 9, 2008 | 02:19 AM
  #1  
Counted Out's Avatar
Thread Starter
TECH Fanatic
iTrader: (6)
 
Joined: Feb 2008
Posts: 1,714
Likes: 0
From: Tucson, AZ
Default Door Panel Write Up

I found this write up on doing your door panels, but it looks to be out of a LS1. Will it basically be the same for an LT1?

http://www.lastofthebreed.com/Instal.../DoorPanel.htm
Reply
Old Oct 9, 2008 | 11:59 AM
  #2  
sneaky7980's Avatar
TECH Enthusiast
iTrader: (15)
 
Joined: Mar 2007
Posts: 700
Likes: 5
From: Walls, MS
Default

Def yes for a pontiac.
Reply
Old Oct 9, 2008 | 11:59 AM
  #3  
TheRedBird's Avatar
Teching In
 
Joined: Feb 2008
Posts: 14
Likes: 0
Default

yessir
Reply
Old Oct 10, 2008 | 12:45 AM
  #4  
Counted Out's Avatar
Thread Starter
TECH Fanatic
iTrader: (6)
 
Joined: Feb 2008
Posts: 1,714
Likes: 0
From: Tucson, AZ
Default

Originally Posted by sneaky7980
Def yes for a pontiac.
It's for a Camaro. Someone I talked to said it's harder on Camaro's. Anyone know why?
Reply
Old Oct 11, 2008 | 01:29 AM
  #5  
vikingramair's Avatar
TECH Fanatic
20 Year Member
Photogenic
Photoriffic
Shutterbug
 
Joined: Jun 2004
Posts: 1,037
Likes: 18
From: Sweden
Default

Because it’s a camaro, the brightest engineers went to Pontiac and Chevy got the left over.
Reply
Old Oct 11, 2008 | 01:41 AM
  #6  
Pyro97's Avatar
Launching!
iTrader: (7)
 
Joined: May 2005
Posts: 202
Likes: 0
From: Aiken, SC
Default

Here's a little writeup I made when I did my Camaro door panels. Maybe you will find it useful.
https://ls1tech.com/forums/showthrea...098&highlight=
Reply
Old Oct 11, 2008 | 10:31 PM
  #7  
Counted Out's Avatar
Thread Starter
TECH Fanatic
iTrader: (6)
 
Joined: Feb 2008
Posts: 1,714
Likes: 0
From: Tucson, AZ
Default

Originally Posted by Pyro97
Here's a little writeup I made when I did my Camaro door panels. Maybe you will find it useful.
https://ls1tech.com/forums/showthrea...098&highlight=
I sent you a PM. Thanks for the link.
Reply
Old Oct 12, 2008 | 01:07 AM
  #8  
mycamaroSS's Avatar
TECH Veteran
iTrader: (4)
 
Joined: Aug 2006
Posts: 4,821
Likes: 0
From: San Marcos/Plano, Texas
Default

Originally Posted by vikingramair
Because it’s a camaro, the brightest engineers went to Pontiac and Chevy got the left over.
you're a naive douche
Originally Posted by Pyro97
Here's a little writeup I made when I did my Camaro door panels. Maybe you will find it useful.
https://ls1tech.com/forums/showthrea...098&highlight=
thanks for the site
Reply




All times are GMT -5. The time now is 02:02 AM.