TH400 Vibration
02-01-2009, 06:19 PM
#1
12 Second Club
Thread Starter
iTrader: (6)
Join Date: Jul 2007
Location: A Mile High
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
TH400 Vibration I just installed my th400 and noticed I have a vibration when decelerating and when I swerve right. I've got it sittin on a yank trans mount with tq arm provision and energy suspension mount. Any ideas? I was thinking driveline. It may be to short I can push it up and down on the trans side a hair, its only in maybe 2" of the tranny. 
02-01-2009, 07:10 PM
#2
Could be...
On my GTO that I just put a TH400 on, the tranny is in a different spot than the old one. Consequently that made my whole engine/tranny combo tilt a little. Now my darn Kooks headers are hitting my steering box causing a vibration through the car and steering wheel when turning to the right(funny enough!).
On my GTO that I just put a TH400 on, the tranny is in a different spot than the old one. Consequently that made my whole engine/tranny combo tilt a little. Now my darn Kooks headers are hitting my steering box causing a vibration through the car and steering wheel when turning to the right(funny enough!).
