Trans cooler line "E" clips
Trans cooler line "E" clips Ok in the middle of removing the trany in my car and I'm to the part where I need to remove those lines. I slid the plastic boot away from the tany and down the lines and I have no idea where these clips are???? All I know is there small and had to get off so what exactly am I looking for color shape size any thing will help I just need to know what I should start playing with. Also if anyone has a pict that will help please share.
Yeah, they are there. They can be a PITA to get out. The first time I pulled my trans it took me about 2.5 hours and probably 1.5 hours of it was just trying to get those damn clips out. Just keep at it and you will eventually get it. Don't get too frustrated though if you get cant them right away.
Hey thanks vince! I still dont see where the clips are though???
can you tell me specifically of better yet put an arrow in in that pict is it between those 2green marks or more out. Or is it what looks to be the gold ring inbetween the 2 silver rings on the neck? Sorry this is my first time pulling the trany myself.
can you tell me specifically of better yet put an arrow in in that pict is it between those 2green marks or more out. Or is it what looks to be the gold ring inbetween the 2 silver rings on the neck? Sorry this is my first time pulling the trany myself. See if this helps any! The clips are under the plastic retainer that you removed at first.
Look for the clips moving in the fittings when the lines are installed in the first video.
In the second video I screwed up but you can see how I remove them.
Vince
Look for the clips moving in the fittings when the lines are installed in the first video.
In the second video I screwed up but you can see how I remove them.
Vince Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo Got the top one out! I have no idea how I just played with it and it shot out and I have no idea where it went which brings me to my next question where can you buy them?
Installing them is very easy as well, it takes me less then a minute to pull them and re-install them. 
yea you can buy them from your local parts store.... also a good hint on installing the tranny back in the car.... put the clips back on before you put the tranny back in the line will just pop right in.... i did this the first time not knowing you could just click the lines back in... i fought for hours to put theses clips back on after i put the tranny in and put the lines back in...
LOL Just trying to help! I had been working on putting together a video last fall and just forgot about it until this thread surfaced. I was looking for pictures in my PB account and came across the video's. With the camera I was using I was limited to the length I could use and recently figured out how to compress them. Now I can do ten minute video's! Just have to find time to make better ones. I'm glad the info was useful. Vince
