Im looking at a cam for a friend but he asked a good question about his stall. He is looking at a 251/259 .624/.624 cam on a 113+2 he has a 3600 stall will that be large enough for this cam.

 

prolly not, he might need like a 5000 or something

 

I would recommend a higher stall for that camshaft. To properly pick one I would need to know more info on your combo. On our website FTIconverters.com there is a build sheet that is downloadable that covers this. Fill this out and email it to me or give me a call at 1-866-726-8358


thanks,
Greg

 

Ok his cam now is not much smaller it 248/254 .624/.624 on 112 He doesnt have to have it flash perfctly into powerband just wants it not to surge at idle if he steps up it idles at 950. ill fill out the form on your website also FTI

 

That's a big cam, I would probably run a 4400 or bigger unless he is spraying

 

Thanks,Fill it out and email it to me or call and I can help.

Thanks,
Greg