stall problems
stall problems I think it maybe time for a new converter. I have a redneck peroformance stall I bought off ebay three years ago. This had done great with cam only and some nitrous. It stalls about 4500. Now since I've installed big heads and cam I'm having problems. I went to the track this past weekend and ran 11.4 @95mph. 1/4 mile I had a 1.54 60ft. time. The car feels real strong out of the hole and this just dosen't pull very hard after that. I was at 6000 rpm at 95mph when I hit the 1/4 mile. I figure I am blowing through the converter. Anyone have any input? I have a th400.
Give me a call and we can discuss your combination. We build full competition converters and transmissions.
Greg
1-866-726-8358
Greg
1-866-726-8358
__________________
FTI COMPETITION CONVERTERS AND TRANSMISSIONS
"IT'S NOT CHEATING, IT'S THE COMPETITIVE EDGE."
1-866-726-8358
info@ftiperformance.com
FTIPerformance.com
FTI Converter build sheet
FTI COMPETITION CONVERTERS AND TRANSMISSIONS
"IT'S NOT CHEATING, IT'S THE COMPETITIVE EDGE."
1-866-726-8358
info@ftiperformance.com
FTIPerformance.com
FTI Converter build sheet
Go ahead and give me a call as well to discuss. 
But a few questions first.
Do you have any way to log the car as it goes down the track?
When you say it stalls about 4500, is that with the current setup?
Do you know what it drops to when it changes gears?
713-895-8834 If you want to call.
Chris
But a few questions first.
Do you have any way to log the car as it goes down the track?
When you say it stalls about 4500, is that with the current setup?
Do you know what it drops to when it changes gears?
713-895-8834 If you want to call.
Chris
