ok i need to get a aftermaket shifter for my 2000 TA i was racing a buddy and had it in 2nd and when i hit it i threw it back to first and broke the teeth on the stock shifter i had narrowed it down to 3 shifter

B&M 80683 http://www.bmracing.com/PRODUCTS/Per...rs/Quicksilver

B&M 80706 http://www.bmracing.com/PRODUCTS/Com...aluminum-cover

B&M 80885 http://www.bmracing.com/PRODUCTS/Per...Hammer-Shifter

the first one is the only one that states will fit a 4L60E but the other will fit a 700R4 and they should be the some except one it vacuum controlled the other is electronic

any input on any of them and which has BEST fitment and installation please feel free to share and comment pics also welcome

 

anybody?

 

ok well im still debating of which one to get

 

You can use just about any ratchet shifter or aftermarket one. I have a quicksilver and a pro ratchet. Both work great! Just leave the little electronic box hooked up off the stock shifter and your good to go. Its a great anti-theft device. Just leave the box in gear and car will never turn over!! Or just leave it in park or neutral and car will run and drive just fine.

 

If anyone is interested they're having a 10% off holiday sale right now PLUS free ground shipping until December 18th. Check their home page:

http://www.bmracing.com/bmracing/default.html

Personally I'd go with the Stealth Ratchet Pro:

http://www.bmracing.com/SPECIALS/Ste...ode=santa_2009

 

the 2nd one is more common around me. everyone seems to like it.

 

Anyone use the quicksilver with the 4l60e???