Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

rear main seal

Old Aug 3, 2009 | 07:35 PM
  #1  
NTXCrazyOne's Avatar
Thread Starter
Staging Lane
iTrader: (2)
 
Joined: Mar 2006
Posts: 59
Likes: 0
From: Fort Worth, TX
Default rear main seal

it keeps fukn up don't know why..
it has happened twice in a month..
starting to get tired of it...

just a bunch of smoke in other people windshields and motor oil on the driveway...sob
Reply
Old Aug 3, 2009 | 10:16 PM
  #2  
Irocem99's Avatar
TECH Resident
 
Joined: Mar 2008
Posts: 771
Likes: 0
Default

Did you change it?
Reply
Old Aug 3, 2009 | 10:20 PM
  #3  
NTXCrazyOne's Avatar
Thread Starter
Staging Lane
iTrader: (2)
 
Joined: Mar 2006
Posts: 59
Likes: 0
From: Fort Worth, TX
Default

I had the tranny built, the original seal was no good, so it was replaced of course, then about two weeks later the new one blew, took it back and got it replaced again...a week later (yesterday) it blew yet another time...Can't figure out why it's doing this...
Reply
Old Aug 5, 2009 | 09:06 PM
  #4  
spaulding's Avatar
TECH Regular
iTrader: (1)
 
Joined: Sep 2004
Posts: 406
Likes: 0
From: Natick mass 508
Default

rear main seal on the motor or tail shaft seal on the tranny??? if its the tranny check and make sure the vent tube is not clogged and building excess pressure in the trans
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:46 AM.