trans and flexplate sheild for 4l80e

Reply Subscribe

Thread Tools

Search this Thread

Sep 27, 2009 | 11:49 PM

1racer

Thread Starter

Teching In

iTrader: (1)

Joined: Nov 2008

Posts: 7

Likes: 0

From: Sheridan, WY

trans and flexplate sheild for 4l80e

What are the options for trans and flexplate sheilds for the 4l80e?
Can you use an ultrabell for a th400 or is there a csr sheild that will work? Or maybe something else.

Thanks in advance.

Sep 28, 2009 | 01:43 PM

1racer

Thread Starter

Teching In

iTrader: (1)

Joined: Nov 2008

Posts: 7

Likes: 0

From: Sheridan, WY

nobody runs these? I know someone did something to be legal @ track any help would be appreciated.

Sep 29, 2009 | 12:53 PM

usmc320

12 Second Club

iTrader: (3)

Joined: May 2008

Posts: 229

Likes: 0

From: VA

Are you talking about the cover for the bottom that mounts to the tranny and the block? If so, I have one that I bought new. I don't remember where I got it from now, but I do know that I was unable to install it with the trans installed. It wouldn't fit b/c of the headers. I'm not going to take the tranny out to install it unless I have another valid reason to remove it. Same thing with the headers, so the cover just sits in the garage waiting for the day it'll get used.

I've never been called out on it at the track either.