Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

transmission swap question

Thread Tools
 
Search this Thread
 
Old Jan 13, 2010 | 03:37 PM
  #1  
squeals99's Avatar
Thread Starter
TECH Enthusiast
iTrader: (8)
 
Joined: Aug 2006
Posts: 664
Likes: 0
From: Linton, IN
Default transmission swap question

alright well i just rebuilt my motor and now i'm basically fucked.... so for the first time ever doing this we didnt get the torque converter aligned and basically broke the front pump... but this trans also was having issues before we even rebuilt the motor with either a 3-4 clutch pack or something that would cause a similar issue... so my question is, i have another 4l60e that came out of a caprice with an lt1 and i am pretty sure that it is a 94 also but not sure, and i know the tailshaft is different, but other than swapping tailshafts will they be interchangeable? can i just get the casting numbers off of the other trans and put them up here to see if they will work because its sitting in the garage and see if it will work by matching up the casting numbers or something like that? what can i do here?

Last edited by squeals99; Jan 13, 2010 at 05:15 PM.
Reply
Old Jan 13, 2010 | 04:38 PM
  #2  
squeals99's Avatar
Thread Starter
TECH Enthusiast
iTrader: (8)
 
Joined: Aug 2006
Posts: 664
Likes: 0
From: Linton, IN
Default

so the numbers on the trans out of the caprice are 24202520
Reply
Old Jan 13, 2010 | 05:14 PM
  #3  
Circa307's Avatar
TECH Apprentice
iTrader: (11)
 
Joined: Mar 2009
Posts: 373
Likes: 0
Default

dude that sucks, good luck and free bump for your crappy day
Reply
Old Jan 13, 2010 | 05:35 PM
  #4  
quews6lime's Avatar
On The Tree
iTrader: (22)
 
Joined: Aug 2009
Posts: 102
Likes: 0
From: creole cockpit
Default

dont know about a caprice... but if u want i have a rebuilt tranny for ur lt1 with the warrenty papers...so if ur interested pm me...
Reply
Old Jan 13, 2010 | 05:51 PM
  #5  
01ssreda4's Avatar
TECH Senior Member
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (96)
 
Joined: Aug 2007
Posts: 24,241
Likes: 89
From: Turnin' Wrenches Infractions: 005
Default

https://ls1tech.com/forums/conversio...ns-4l60es.html
Reply
Old Jan 13, 2010 | 06:00 PM
  #6  
squeals99's Avatar
Thread Starter
TECH Enthusiast
iTrader: (8)
 
Joined: Aug 2006
Posts: 664
Likes: 0
From: Linton, IN
Default

that was kind of a mess to read lol... but it sounds like as long as the tailshaft is swapped to work and i may have to run a wire from the pcm to one fo the trans plug ins or something like that, but other than that it should work it sounds like...
Reply
Old Jan 17, 2010 | 09:02 PM
  #7  
LT1Formula007's Avatar
10 Second Club
iTrader: (66)
 
Joined: Mar 2007
Posts: 1,378
Likes: 0
From: Indianapolis, IN
Default

Squeals99; If your wanting to save the hassle of taking a chance with the other tranny (caprice trans) going out, LMK!

I can get you in contact with a buddy of mine who builds them and he'd rebuild the 4L60E for you for about $450-$500.

He built my level 4 Transmission for my Z and it ran me $1700. Works like a dream... Just had a small issue after beating on it all summer with a 10 second car. LOL But he rebuilt it again for $300.00.
(That was All Parts/He didn't charge me any labor)
He also did the Transmission in my Truck for $500
Great guy to deal with. And he has built over 30+ transmissions for friends of mine.

Good Luck Buddy!
PM me if your interested.

James
Reply




All times are GMT -5. The time now is 08:48 PM.