95 4L60-E bolt up to a LS motor?
02-02-2010, 04:29 PM
#1
Staging Lane
Thread Starter
Join Date: May 2007
Location: McAllen,Texas
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
95 4L60-E bolt up to a LS motor? My cousin bought a built 4L60-E transmission for his LT1. He is thinking about buying a 6.0L and was curious if his transmission would bolt on to the 6.0L. I dont think it will so my question is, are there company's out there that sell adapters to bolt an older 4l60e to a new gen 3 motor?
02-02-2010, 05:37 PM
#2
Basically, all automatics GM have ever made, will bolt up, to any Chevy small block, or big-block V-8, that they ever made. They will all physically bolt-up, because the bolt pattern is the same, no matter the horsepower rating, or cubic inch displacement. This, of course applies to any stick-shift tranny bellhousings as well, that GM made. As far as a 4L60E(built or otherwise)having a reasonable lifespan behind a 6.0 litre, even a stock 6.0 litre, draws negative opinions(of experience) from most folks on this website.
