TH400 what convertor should I use?
Thread Starter
TECH Enthusiast
iTrader: (22)
Joined: Jun 2006
Posts: 746
Likes: 0
From: Millersville, MD
TH400 what convertor should I use? Well I got my TH400 trans sitting here and know what flexplate to run but have no idea what convertor to use with it considering I was gonna run 4.30 gears with my 12 bolt because Im 6 speed right now. Im running a 232/232 cam with a wilson 95mm tb and 92mm intake manifold along with all the regular boltons except EWP and will eventually add a set of trickflow heads. I was figuring on running something in the 4000 range to be a little easier on the car since I'll be running a tranbrake as well. Let me know what you recommend for a setup like this.
You need a custom built converter. i can spec one out for you if you would like. give me a call at 1-866-726-8358
Greg
Greg
__________________
FTI COMPETITION CONVERTERS AND TRANSMISSIONS
"IT'S NOT CHEATING, IT'S THE COMPETITIVE EDGE."
1-866-726-8358
info@ftiperformance.com
FTIPerformance.com
FTI Converter build sheet
FTI COMPETITION CONVERTERS AND TRANSMISSIONS
"IT'S NOT CHEATING, IT'S THE COMPETITIVE EDGE."
1-866-726-8358
info@ftiperformance.com
FTIPerformance.com
FTI Converter build sheet
lsx car, get a gen1 sbc converter, TCI flexplate and use the spacer it comes with. Get longer bolts from Sears and ure done. JUST had to figure this out with my th350 swap a week ago and i had major headachs tryin to figure out what to do.
My set-up---
6.0
th350 trans
gen1 converter for a th350
TCI flexplate
My set-up---
6.0
th350 trans
gen1 converter for a th350
TCI flexplate
heres the thread u can look through. And FWIW, im sure a gen1 converter will be a lot cheaper then a custom lsx converter if ure a little tight on cash. Not knockin FTI im sure there converters are badass!
https://ls1tech.com/forums/automatic...-what-use.html
https://ls1tech.com/forums/automatic...-what-use.html
Greg @ FTI will get you squared away. I couldnt be happier with mine.
