t56 to a th350 help
03-14-2010, 03:16 PM
#1
Teching In
Thread Starter
Join Date: Sep 2009
Location: lincoln, ne
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
t56 to a th350 help I realize this is probably already out there. but I'm trading my blown t56 for a th350 that has a 3200 stall.
I'm not to savy on the th350's. I'm thinking I'm going to need a flewplate spacer and a bellhousing adapter.
if anyone can think of anything else I will need to make it go smooth I would appreciate it. THANKS
I'm not to savy on the th350's. I'm thinking I'm going to need a flewplate spacer and a bellhousing adapter.
if anyone can think of anything else I will need to make it go smooth I would appreciate it. THANKS
03-15-2010, 01:36 PM
#3
Teching In
Thread Starter
Join Date: Sep 2009
Location: lincoln, ne
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
what about tools? I don't really wanna use my buddies. I've never really had a place to store a tool boxx argo never really bought the tools. what basic tools of the trade should I buy?
