TCI Converter Question
#1
TCI Converter Question
Can someone please confirm what size bolts I will need for my TCI converter? I ran some searches and found 7x16x20 or 7x16x20x1.
I would also like some suggetions on where to get these bolts (Jegs, Home Depot, Lowes). Does home depot or lowes have the higher level grade bolts I would need?
I would also like some suggetions on where to get these bolts (Jegs, Home Depot, Lowes). Does home depot or lowes have the higher level grade bolts I would need?
#2
Thank you! I wanted to be sure to get the correct bolt the first time. Is there anything else that I should get or be aware of when getting the correct 7/16-20x1?
#4
If you're using the stock flexplate you need to drill the one oval hole out to fit the bolt. It'll suck if you forget and have to do it with the trans in the car.
I had one of these converters once and I'm pretty sure they use nuts too, it really sucks reaching the backside to hold the nut in place.
FWIW I had a TCI built in 2002 that used the stock bolts, at the same time I had one with the same part number built in 2005 that used the 7/16 bolts.
I don't know what your doing but if by some odd chance you're getting a used TCI, watch out for that.
I had one of these converters once and I'm pretty sure they use nuts too, it really sucks reaching the backside to hold the nut in place.
FWIW I had a TCI built in 2002 that used the stock bolts, at the same time I had one with the same part number built in 2005 that used the 7/16 bolts.
I don't know what your doing but if by some odd chance you're getting a used TCI, watch out for that.
Let me also plug Circle D, they were very friendly and answered any and all of my questions. My first big boy converter will be with them when the car is ready
So I will need the 7/16 bolts that can be purchased anywhere. I would assume some locktite? Any other tips or tricks would be very much appriciated. Thank you all so far for the help.