m6- th 400 swap.
Thread Starter
Teching In
Joined: Nov 2008
Posts: 36
Likes: 0
From: houston
m6- th 400 swap. iva done this once before but it has been years.
1. will any bellousing bolt upto the ls1 or do i need and adapeter plate (didnt use one last time)
2. flex plate suggestions and part numbers
3. i know the th350 needs a long tail shaft but does the 400?
4. when i did my last swap i had no speedometer reading at all how do you do the swap and keep the speedo working.
5. who makes a good cross member for this swap (last time made my own)
6. best place to get an affordable but strong th350 or 400, i am only making a bolt on car so no need for 1000 hp tranny.
any other things i may need?
thanks guys,
Marty
1. will any bellousing bolt upto the ls1 or do i need and adapeter plate (didnt use one last time)
2. flex plate suggestions and part numbers
3. i know the th350 needs a long tail shaft but does the 400?
4. when i did my last swap i had no speedometer reading at all how do you do the swap and keep the speedo working.
5. who makes a good cross member for this swap (last time made my own)
6. best place to get an affordable but strong th350 or 400, i am only making a bolt on car so no need for 1000 hp tranny.
any other things i may need?
thanks guys,
Marty
11 Second Club
iTrader: (27)
Joined: May 2005
Posts: 6,799
Likes: 5
From: Your girl's back door giving her the long stroke while you're at work
Thread Starter
Teching In
Joined: Nov 2008
Posts: 36
Likes: 0
From: houston
