braided line routing

Reply Subscribe

Thread Tools

Search this Thread

Aug 2, 2010 | 10:41 PM

TTA1437

Thread Starter

On The Tree

iTrader: (7)

Joined: Mar 2007

Posts: 146

Likes: 0

From: Montgomery, AL

braided line routing

Any of you guys have pictures or can tell me how you routed your braided tranny lines to the cooler and back to the transmission?

Thanks
Rob

Aug 6, 2010 | 04:04 PM

KBG

Launching!

iTrader: (32)

Joined: Jan 2008

Posts: 272

Likes: 0

From: Biloxi, MS

what exactly do you want to see??.....it's pretty much a straight shot down the passenger side of the tranny up to where the cooler is in front

Aug 6, 2010 | 08:54 PM

subhumanzz

9 Second Club

iTrader: (46)

Joined: May 2006

Posts: 1,037

Likes: 0

From: Fredericksburg, VA

i would like to see some pics how they are routed too. i dont see a way to keep them away from the headers.

Aug 7, 2010 | 11:48 AM

TTA1437

Thread Starter

On The Tree

iTrader: (7)

Joined: Mar 2007

Posts: 146

Likes: 0

From: Montgomery, AL

Quote:

Originally Posted by subhumanzz

i would like to see some pics how they are routed too. i dont see a way to keep them away from the headers.

Thats basically what Im interested in seeing. How people route the lines to shield from the headers.

Thanks

Aug 7, 2010 | 02:23 PM

subhumanzz

9 Second Club

iTrader: (46)

Joined: May 2006

Posts: 1,037

Likes: 0

From: Fredericksburg, VA

i actually ran some braided -6an lines today. i ran them from the cooler (infront of the radiator) beside the motor mount on top of the k member. then i drilled a small hole in the inspection cover of the started, i zip tied them up there and then landed them on the trans. its pretty simple once you get under there and look at it.

Reply Subscribe