Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

P0741 code on 07 silverado NNBS with perforabuilt converter

Old Nov 28, 2010 | 07:09 AM
  #1  
IH8FORD's Avatar
Thread Starter
10 Second Club
iTrader: (6)
 
Joined: Mar 2007
Posts: 952
Likes: 0
From: Fuquay Varina, NC
Default P0741 code on 07 silverado NNBS with perforabuilt converter

I keep getting this p0741 code (TCC switch stuck in off position) The converter does not lock up sometimes and every once in a while it will. I bought this converter used and have put about 25000 hard miles on it myself. I have no idea how long the previous owner may have had it. The truck has a 4.8 with nitrous, cam and headers and has run a 7.98 in the 1/8 with a 1.74 60ft. Converter and trans. work great other than the lock up problem.

What i would like to know is should i send the converter back for a rebuild. I think the clutch is going out in it. Or is there some other problem.
Reply
Old Nov 28, 2010 | 11:33 AM
  #2  
performabuilt's Avatar
LS1Tech Sponsor
15 Year Member
Liked
Loved
Community Favorite
iTrader: (25)
 
Joined: Aug 2006
Posts: 10,854
Likes: 80
From: BLOOMSBURG PA
Default

I would say if the converter locks anytime then its not a converter issue. I would check the tcc solenoid first.
__________________
Built..PerformaBuilt..Tough

Call 888-744-6542


Reply
Old Nov 28, 2010 | 12:44 PM
  #3  
IH8FORD's Avatar
Thread Starter
10 Second Club
iTrader: (6)
 
Joined: Mar 2007
Posts: 952
Likes: 0
From: Fuquay Varina, NC
Default

Originally Posted by performabuilt
I would say if the converter locks anytime then its not a converter issue. I would check the tcc solenoid first.
That"s good news. The truck and trans only have 30,000 miles. Would the TCC solenoid go out that quick. The trans also has a fairbanks valvebody kit in it.
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:11 PM.