Bullit95T/A

WHO HAS THE BEST 4L60E REBUILD KIT I WANT MY TRANS TO HOLD UP AT LEAST 500 FT/LB OF TORQUE? I am rebuilding this trans myself....and it goin onto a 1996 Z28

Jays_SSZ28

iTrader: (2)

ProBuilt by Dana

Hemi2Slo

Also, monstertransmissions.com
I bought this kit in their version for my 98 car, and also my friend bought one for his 02. Haven't had any dealings with them other than ordering the kit. But our transmission guy told us its all top quality stuff. We've been pleased with them.

Bullit95T/A

OK i think i'll will go that route with my 4L60E i just wanted some positive input on some kits because this is my first 4L60E rebuild and again thanks...

Jays_SSZ28

iTrader: (2)

I bought a 3-4 clutch set and vac mod from ProBuilt back in 2005, Thats it.

Dana (who is the guy who does everything there) knows what I've bought from him and when. We've talked on the phone several times about 6 months ago, sometimes over an hour and a half. I was having a strange problem with my trans that no one really had any answers to. He gave me advice which eventually lead to me getting the problem solved.

He puts together kits specifically for what you have and what you're doing with it. You can also buy kits listed on the site. And he helps out on this forum often. He also includes modified instructions based on his years of experience.

Monster uses Superior Products shift kits in their kits, those aren't that great.

Vince B

iTrader: (1)

When buying parts tech support is a big plus! There are many places that sell parts however when you need tech support there isn't any. This seperates the good from the bad in my opinion. Keep that in mind while you look around and in some cases price should not be your main concern. +1 for Dana hope this helps. Vince

Hemi2Slo

Yeah I would've much rather had a transgo kit since I have one in my truck and love it, but the one that came from monster seems to shift good. It doesn't hit third nearly as hard as the transgo does however.

Bullit95T/A

I WILL CHECK INTO ALL THE ABOVE BEFORE I DO THE REBUILD FOR SURE!!!
I just want something that will hold my power in the making and if it blows ..well it's for ***** and giggles...but thanks for all the good input and opinions.....

Phillip Myrick

Howd the rebuild go? Did you go with monster transmissions?

RevGTO

iTrader: (12)

Philip, this thread is six years old. I doubt the original poster is still following it. The best thing for you to do is start your own thread asking about people's successes with rebuild kits.