is my stall to small for this cam?
Thread Starter
TECH Fanatic
Joined: Jun 2006
Posts: 1,326
Likes: 0
From: Hayward CA
is my stall to small for this cam? car is a 99 fbody with a th400 and 4400 stall
and the new cam i got specd out is a 23*/25* /610/632 on a 113lsa
weight with me in car give or take 3500 to 3600
and the new cam i got specd out is a 23*/25* /610/632 on a 113lsa
weight with me in car give or take 3500 to 3600
where is your torque peak.....
where does the curve start to come in...
need info..
dyno graph would be useful in determining that
I would guess that your stall is not too big from your cam specs...
but you may need to spin it pretty high to get the full benefits from your stall/trans combo.
where does the curve start to come in...
need info..
dyno graph would be useful in determining that
I would guess that your stall is not too big from your cam specs...
but you may need to spin it pretty high to get the full benefits from your stall/trans combo.
