4l60e no 3rd and 4th
05-09-2011, 09:20 PM
#1
Registered User
Thread Starter
Join Date: Nov 2010
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
4l60e no 3rd and 4th i have an ls1 with headers,cam,3000 stall, before i put the stall on it i had it tuned now i put the stall on it and the car of course has been slipping and going out on just woundering what to do .......
problems it doesnt have 3rd or 4th only 1 and 2 when in manual
can it be the tune or the toque converter or the sensors or line pressure and answers would help thanks
problems it doesnt have 3rd or 4th only 1 and 2 when in manual
can it be the tune or the toque converter or the sensors or line pressure and answers would help thanks
05-10-2011, 06:24 PM
#2
Its probably the 3-4 gear clutch packs. Mine were going bad at the end of last summer, I did a cam, header, ls6 intake install and took it to the tuner last week. Well, my ailing 3-4 clutch pack obviously didn't like the stress of a chassis dyno. My 3rd gear is slipping really bad. Trans time. The upside? It still pulled down 382 hp to the wheels with a sick trans.
05-11-2011, 09:33 AM
#3
Registered User
Thread Starter
Join Date: Nov 2010
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
well i tried to let the car cooll down for a few days and this morning i took it for a spin still the same im still covered under warrenty i guess ill get it fixed
wounder if it has anything to do with line pressure?
wounder if it has anything to do with line pressure?
