Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

trans problems

Thread Tools
 
Search this Thread
 
Old Dec 2, 2011 | 04:07 PM
  #1  
treadsback's Avatar
Thread Starter
Teching In
 
Joined: Feb 2011
Posts: 46
Likes: 0
From: tacoma, wa
Default trans problems

I just had a yank ss 3600 stall put in. When driving in drive, half way through 2nd gear the gear doesnt engage anymore. But if i start from a stop and put it in 1st then in second it goes all the way through 2nd as soon as i put it in drive the rpms go up but it doesnt eccalerate. ANYONE KNOW WHAT THE PROBLEM IS????
Reply
Old Dec 2, 2011 | 04:45 PM
  #2  
lt1-xjs's Avatar
TECH Fanatic
15 Year Member
 
Joined: Jun 2007
Posts: 1,255
Likes: 11
From: centerville, ohio
Default

Originally Posted by treadsback
I just had a yank ss 3600 stall put in. When driving in drive, half way through 2nd gear the gear doesnt engage anymore. But if i start from a stop and put it in 1st then in second it goes all the way through 2nd as soon as i put it in drive the rpms go up but it doesnt eccalerate. ANYONE KNOW WHAT THE PROBLEM IS????
Depending on the year, you may need a tune for the converter.
Reply
Old Dec 3, 2011 | 01:13 PM
  #3  
treadsback's Avatar
Thread Starter
Teching In
 
Joined: Feb 2011
Posts: 46
Likes: 0
From: tacoma, wa
Default

its a 2000 z28
Reply




All times are GMT -5. The time now is 08:24 PM.