Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

4l60e not shifting right

Old Mar 21, 2004 | 10:42 AM
  #1  
meatyz's Avatar
Thread Starter
TECH Apprentice
iTrader: (2)
 
Joined: Nov 2003
Posts: 363
Likes: 0
From: nj
Default 4l60e not shifting right

i just purchased a 2002 ss a4 i no before i bought it the pump was changed the first week i had it it would shift terrible is een it was low on fluid so i kept adding,and it got alittle better but still not good.....at low speeds like 20mph you hit the gas like half throtle or more the rpm come up and the car dont move then it kicks in,at 60-70 does the same thing...also at wide open throttle has a very week shift like it slips threw the next gear and it shifts like 6100 rpm...def holding back the cars potental this is my fourth automatic camaro,the others shifted like a dream compared to this one..another thing i also have a 1998 z28 auto with 373 gears and 2600 stall converter programmed that car shifts quick and hard with the hypertech programming at 100 percent...i bought a hypertech programmer for the 2002 and had it set at 100 percent shifts and doesnt even make a differnce and doesnt hold the gear at all...what can this be guys??
Reply
Old Mar 21, 2004 | 01:11 PM
  #2  
ShadowLightCSU's Avatar
TECH Enthusiast
iTrader: (1)
 
Joined: May 2003
Posts: 639
Likes: 0
Default

For one thing, don't adjust line pressure with a Hypertech, it is going to really hurt your transmission. Is your 02 under warranty? If so, go talk to your dealer.
Reply
Old Mar 22, 2004 | 05:38 AM
  #3  
98SS Blackattack's Avatar
TECH Fanatic
 
Joined: Jun 2002
Posts: 1,227
Likes: 0
From: Indianapolis
Default

Yea dont go over 50% with the HPP3.
Reply
Old Mar 23, 2004 | 09:18 PM
  #4  
meatyz's Avatar
Thread Starter
TECH Apprentice
iTrader: (2)
 
Joined: Nov 2003
Posts: 363
Likes: 0
From: nj
Default tranny

i wanted to see if it would shift any harder with the firmness at 100 percent and it didnt do a damn thing but in my 1998 z it blows the tires at 1-2 shift
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:32 PM.