Adapting plate
#1
Staging Lane
Thread Starter
Join Date: Jun 2010
Location: Kingston, Ontario, Canada
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Hey guys I was curious if there was an adaption plate that would allow me to use my th350 with a BOP bolt pattern with an ls style engine....I built the tranny to go behind a big cube Pontiac but may consider doing ls swap...this would make the decision a lot easier not having to get a new transmission
Thanks
Mike
Thanks
Mike
#3
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
http://www.jegs.com/p/JEGS-Performan...51074/10002/-1
You might take a look at that link and see if one of those will work.
g
You might take a look at that link and see if one of those will work.
g
#4
Staging Lane
Thread Starter
Join Date: Jun 2010
Location: Kingston, Ontario, Canada
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
http://www.jegs.com/p/JEGS-Performan...51074/10002/-1
You might take a look at that link and see if one of those will work.
g
You might take a look at that link and see if one of those will work.
g
Thanks....thats exactly what i was looking for...awsome now i get to decide weither I want a an lsx motor or stay with my pontiac 474