4l60e 2-3 flaring
#1
4l60e 2-3 flaring
I've noticed some flaring between 2 and 3 at WOT. It doesn't happen during normal driving. Is there anything I should try or should I just go ahead and plan on having it rebuilt? it was rebuilt a little over a year ago before it was put into my regal along with a 5.3. I've heard things like maybe a bad computer, sicking solenoid, dirty MAF, and bad manual lever position sensor? Should I even look into any of those as a possibility?
I've considered a 4l80 swap but would much rather stick with the 60 if it can be built to hold up.
I've considered a 4l80 swap but would much rather stick with the 60 if it can be built to hold up.
#4
TECH Apprentice
Join Date: Dec 2008
Location: Westbank of N.O.
Posts: 333
Likes: 0
Received 0 Likes
on
0 Posts
if it's ready to go south on u, the flare will turn to neutral and u will know soon enough. There are a number of things that can be done to help the 3-4 pack survive...I do them all. A new product is almost ready to be put into my hands by the end of the month, the sonnax smart-shell input drum. No more snap ring and plenty more clutches plus the ability to run stupid line pressure and not blow the snapring out of the input drum....