Flt for 4l80??
You think I need to go to a stage 5? If you do give me a call and I will upgrade. I just talked to Mike tonight and he was gathering parts to start on mine. My name is Jerrame, give me a call if you think I should go to a 5. Eventually the f1 will be replaced by a turbo and more cubes so I can hit the 900+ rwhp mark.
My machine shop is making the Super Drum setups as we speak, if we get a few "test units" soon enough, you may get a free upgrade. 
Teching In
Joined: Jul 2007
Posts: 35
Likes: 0
Thread Starter
Teching In
Joined: Sep 2009
Posts: 19
Likes: 0
Hey jake,
I have already ordered my stage 5 almost 5 weeks ago, just wondering if you can assemble mine with the billet super drum you normally use instead of your new version just so I can get the trans!! Only reason being the car is off the road waiting for my new 80??
Is that a problem or a bad idea? Please let me know your thoughts
Brett
I have already ordered my stage 5 almost 5 weeks ago, just wondering if you can assemble mine with the billet super drum you normally use instead of your new version just so I can get the trans!! Only reason being the car is off the road waiting for my new 80??
Is that a problem or a bad idea? Please let me know your thoughts
Brett
Hey jake,
I have already ordered my stage 5 almost 5 weeks ago, just wondering if you can assemble mine with the billet super drum you normally use instead of your new version just so I can get the trans!! Only reason being the car is off the road waiting for my new 80??
Is that a problem or a bad idea? Please let me know your thoughts
Brett
I have already ordered my stage 5 almost 5 weeks ago, just wondering if you can assemble mine with the billet super drum you normally use instead of your new version just so I can get the trans!! Only reason being the car is off the road waiting for my new 80??
Is that a problem or a bad idea? Please let me know your thoughts
Brett
Yes, yours is in process (apart, case cleaned) and will be going together Monday. We have a drum in stock to use for yours, so you won't need to wait for ours.
Jake
Staging Lane
Joined: May 2012
Posts: 52
Likes: 0
hey jake how long until your new drums will be ready I'm going to order a complete rebuild kit, shafts and one of your new T/Brake valve bodies off you to build a 4l80e to take 1000HP so might get the whole lot in 1 hit
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
The drums themselves should be done middle of next week. I still have to make the retainer plates for the sprag. I need to drop those off at the sheetmetal shop.
Launching!
Joined: Jan 2012
Posts: 234
Likes: 0
From: Disneyland or St Louis
I'm very familiar with "Collen Freezing". It actually was invented by " Bambi Collen" the stripper who was the first to put ice cubes in her mouth before performing Fellatio.
If this means I get a blow job for buying a transmission from Mad Dog, I need directions to their shop.
