during a TC install...?
Thread Starter
TECH Fanatic
Joined: Sep 2002
Posts: 1,306
Likes: 0
From: DETROIT MUSCLE
during a TC install...? when i drop off the car to get my TC installed is there anything that should be done to "support" the transmission. sunshell? servoes? also if i add new servoes or sunshell could i possibly hurt something else in my trans? any reccomendations would be great!
thanks J
thanks J
Originally Posted by heyitsTaJay
when i drop off the car to get my TC installed is there anything that should be done to "support" the transmission. sunshell? servoes? also if i add new servoes or sunshell could i possibly hurt something else in my trans? any reccomendations would be great!
thanks J
thanks J
As stated by other the tranny cooler is a must. I sunshell is always great but they have to take most of the tranny apart to have that done so I would wait till ya need a rebuild. I would stay away from the billet servos . The corvette servos comes stock in the ls1 fbodys so that does not need to be changed.
9 Second Club
Joined: Jul 2003
Posts: 1,195
Likes: 0
A billet pump would be nice. If you can find one. I have one in mine and I run 275 psi in my A4 also. I have been running it at the track for over a year now with no problems. 6.20's in the 1/8 mile with a 4L60E.
