Likely gain from raising the stall?
Thread Starter
11 Second Club
Joined: Feb 2009
Posts: 517
Likes: 1
From: ohio
Likely gain from raising the stall? We have a 3,200 Edge stall which I thought was a 3,600. Best run so far has been an 11.63 at 117.8 mph on a da of around 1560. It 60 ft'd a 1.64 on that pass and the 1/8 mile was a 7.4 with a surprising low 91 mph (it usually is around 93 or 94 mph). With the cam being a Torquer v2 we're leaning towards sending the stall back to Edge and having them take it to around 4,200 or 4,400, where the torque peak is.
Right now the mickey thompsons are hooking up.
Anyone have educated guesses on what to expect?
Here is the run That run corrects to an 11.52@119 mph
Right now the mickey thompsons are hooking up.
Anyone have educated guesses on what to expect?
Here is the run
Last edited by prokilllsx; Nov 16, 2012 at 01:22 PM.
