vette stall work in fbody?
#1
Launching!
Thread Starter
iTrader: (6)
Join Date: Sep 2011
Location: Florida
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
vette stall work in fbody?
so a friend of mine recently had a trans built by a local shop, they gave him a great deal on a 8 mile old stall that was in a vette. (owner of the vette didnt like it so they put in a smaller one for him)
anyway, we yanked is old trans out, installed the new one, and the converter was about an inch gap between the converter and the flywheel.
now i know the converter has to twist in and lock 2 times, which was done by the builder.
after its locked in is it ok to pull that extra inch i need to secure it to the flywheel? or is it just the wrong converter?
builder has already agreed to deliver a new converter free of charge and help is with the reinstall.
but if the converter will work id rather not wait
all help is appreciated!
thanks!
anyway, we yanked is old trans out, installed the new one, and the converter was about an inch gap between the converter and the flywheel.
now i know the converter has to twist in and lock 2 times, which was done by the builder.
after its locked in is it ok to pull that extra inch i need to secure it to the flywheel? or is it just the wrong converter?
builder has already agreed to deliver a new converter free of charge and help is with the reinstall.
but if the converter will work id rather not wait
all help is appreciated!
thanks!