Trying to figure out how to size a converter for my build i was thinking a 4000 stall was what i needed based on my reading but not sure a 3600 would not be fine. Here is what i have LS1 11.1 comp 235/23X 62X/62X 111+2 cam 3.90 or 4.10 gears mostly street driven hopefully high 400's whp

 

Either one really...I like your first thought though

 

Our 245mm 5C would rock in that setup, the cam would love it. But might be a bit aggressive if you rarely go to the track. So really depends on usage. If you can fill out an Ask Chris form I would be happy to help you select the perfect stall for you. Link is in sig...

Chris

 

Form sent!

 

Go 4000, you won't regret that.. You might regret a 3600.

 

Depends on who makes the stall and how streetable you need it. For the track, ideally, you want it around 200 rpm over wherever you make peak torque. I would expect that to be around a 4,800 for your cam. Just a guess though. A dyno sheet would tell you what would net you the best times.

 

6TOGO. I sent you a pm response.

Greg