help please
help please I have searched high and low for a linkage for a 4l60e that goes on the gear selector shaft. I put a jakes perf 4l80 in and I don't have a linkage that hooks up to the shifter cable. This is the only thing that is keeping my build from being done. I could drill through and rig it up but I would rather do it right since I have all the rest of the parts minus the linkage. I checked the junkyards around here but there isn't many of these cars around here for obvious reasons. If anyone has one please lmk. I would be more than happy to purchase one if ya have one. Thanks Chris
Moderator
Joined: Aug 2010
Posts: 7,323
Likes: 529
From: Ann Arbor, MI
Have you tried the dealer?
I would have them look up a 2008 Trailblazer SS; then look at the parts picture and try to pick out the linkage bracket.
Else try a long-time local trans shop; mine has a small barn full of old transmissions for any imaginable part. I'll bet other do too.
Sorry, I don't have an extra one.
I would have them look up a 2008 Trailblazer SS; then look at the parts picture and try to pick out the linkage bracket.
Else try a long-time local trans shop; mine has a small barn full of old transmissions for any imaginable part. I'll bet other do too.
Sorry, I don't have an extra one.
