Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

no 3-4 shift

Thread Tools
 
Search this Thread
 
Old May 17, 2004 | 09:37 PM
  #1  
jbbiggs's Avatar
Thread Starter
Teching In
 
Joined: May 2004
Posts: 4
Likes: 0
Default no 3-4 shift

Hi everyone, first post and i am begging for help My 4l60e shifts great through 1-2-3 and thats it, I can shift from 4th to 3rd manualy and the convertor unlocks for about a second and then locks back up, can shift into neutral then back into overdrive at anything over 45mph and the motor bogs like its binding for a split second and goes back to 3rd. Transmission is fresh, fluid pretty, runs around 160*????
Reply
Old May 18, 2004 | 07:18 AM
  #2  
SMOKINV8's Avatar
TECH Fanatic
iTrader: (6)
 
Joined: Jan 2002
Posts: 1,193
Likes: 0
From: Springfield, IL
Default

Do a search for "Shift Solenoid" and see what you find. I posted the symptoms of my car which had a bad solenoid a while back, so you might even look for my post regarding that.
Reply
Old May 18, 2004 | 08:50 PM
  #3  
jbbiggs's Avatar
Thread Starter
Teching In
 
Joined: May 2004
Posts: 4
Likes: 0
Default

Was your not shifting into OD?
Originally Posted by SMOKINV8
Do a search for "Shift Solenoid" and see what you find. I posted the symptoms of my car which had a bad solenoid a while back, so you might even look for my post regarding that.
Reply
Old May 19, 2004 | 11:09 AM
  #4  
SMOKINV8's Avatar
TECH Fanatic
iTrader: (6)
 
Joined: Jan 2002
Posts: 1,193
Likes: 0
From: Springfield, IL
Default

Use the search feature noob.

Full description:
https://ls1tech.com/forums/automatic-transmission/161121-intermittent-trans-problem-autotap-scan-included.html
Reply
Old May 19, 2004 | 02:04 PM
  #5  
jbbiggs's Avatar
Thread Starter
Teching In
 
Joined: May 2004
Posts: 4
Likes: 0
Default

Ok your problem was a little different, mine has no problem from a dead stop only OD, the lockup and all works great...
Reply
Old May 20, 2004 | 06:52 PM
  #6  
jbbiggs's Avatar
Thread Starter
Teching In
 
Joined: May 2004
Posts: 4
Likes: 0
Default

Thanks for the help guys, I figured it out............
Reply




All times are GMT -5. The time now is 04:32 PM.