B&M ShiftPlus on a 2000
Thread Starter
Teching In
Joined: May 2005
Posts: 37
Likes: 0
B&M ShiftPlus on a 2000 Hi, I ordered a B&M ShiftPlus for my 4L60E (1993-1998..its the only years that it is recommended for) and the listing didn't say what years it was for (just the trans) and I was wondering if anyone knows what wires to splice into for a 2000 T/A so it will work? I left a listing for it and the manual. Thanks!
https://www.jegs.com/i/B-M/130/70380/10002/-1
Manual:
https://www.jegs.com/InstallationIns.../130-70380.pdf
https://www.jegs.com/i/B-M/130/70380/10002/-1
Manual:
https://www.jegs.com/InstallationIns.../130-70380.pdf
TECH Junkie
Joined: Jun 2008
Posts: 3,204
Likes: 1,391
From: Nitro Alley
Well I am not certain how this is going to work for you with a 2000 year vehicle and instructions that only go up to year 1998...
Hopefully someone can chime in and state if the wiring is unchanged.
You only have to be concerned with two circuits (2 wires) from the transmission electrical connector.
The wire coming out of terminal "C" and the wire from terminal "D".
Terminal "C" has a RED wire with a BLACK tracer line...
Terminal "D" has a Light BLUE wire with a WHITE tracer line...
Note OLD wires that have been exposed to the elements under the vehicle tend to fade to lighter colors.
Hopefully someone can chime in and state if the wiring is unchanged.
You only have to be concerned with two circuits (2 wires) from the transmission electrical connector.
The wire coming out of terminal "C" and the wire from terminal "D".
Terminal "C" has a RED wire with a BLACK tracer line...
Terminal "D" has a Light BLUE wire with a WHITE tracer line...
Note OLD wires that have been exposed to the elements under the vehicle tend to fade to lighter colors.
