Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

raptor th400 ls1 kit

Thread Tools
 
Search this Thread
 
Old Jul 12, 2004 | 07:43 AM
  #1  
awesomeame's Avatar
Thread Starter
On The Tree
 
Joined: Jul 2004
Posts: 111
Likes: 0
From: Kitchener, Ontario, Canada
Default raptor th400 ls1 kit

has anyone bought this Raptor TH400 w/LS1 install kit from these guys? scroll down, it's about 1/2 way down.

http://www.transmissioncenter.net/35...erformance.htm

just want to get some opinions on this kit if anyone has any. does anyone else sell a similar kit? are all the items listed required for the install? thanks!

--matt
Reply
Old Jul 12, 2004 | 09:09 AM
  #2  
stangeater01's Avatar
Registered User
iTrader: (125)
 
Joined: Oct 2003
Posts: 569
Likes: 0
From: New Orleans
Default

i have been looking for 2 weeks and doing my reasearch they seem to be ok but from what i have found they are not to well known and everyone has told me to go to rossler. you will basically get the same trani for the same price the only differences are rossler's trani's are well known and you will get a trans break patc (raptor) doesn't offer this. that set up (the whole thing) is pretty expensive with the converter, flex plate torque arm, safety loop, i have all this and i know i didnt pay 3600+ for it
i payed
550 for torque arm and safety loop BMR
200 flexplate
700 converter
1295 trani w/break
=2745
it may be a ok idea to buy the trani but the whole set up is kinda expensive
truthfuly i couldn't believe it when i saw the price
this is just my opinion
Thanks Richard
Reply
Old Jul 12, 2004 | 09:12 AM
  #3  
stangeater01's Avatar
Registered User
iTrader: (125)
 
Joined: Oct 2003
Posts: 569
Likes: 0
From: New Orleans
Default

i payed 250 for my drive shaft, i also used my stock trani mount bought a 25 poly mount and made 2 alumn. block 3/4" and put between the floor and the trani to drop it down a little for the poly mount
Reply
Old Jul 12, 2004 | 10:56 AM
  #4  
awesomeame's Avatar
Thread Starter
On The Tree
 
Joined: Jul 2004
Posts: 111
Likes: 0
From: Kitchener, Ontario, Canada
Default

do you have a link for rossler? i've never heard of them

also i was under the impression that the ds length between th400 & rear end was different, so that's why raptor was providing those in the kit. am i wrong with this? will a regular fbody spohn tq arm work with a th400 setup? and a regular fbody steel ds? thanks for the replies!

--matt
Reply
Old Jul 12, 2004 | 11:24 AM
  #5  
stangeater01's Avatar
Registered User
iTrader: (125)
 
Joined: Oct 2003
Posts: 569
Likes: 0
From: New Orleans
Default

call 330-530-5000 guys name is Carl tell him what you have and he will custom build you one there is no set parts he builds the trani to your car and your hp
Reply
Old Jul 12, 2004 | 11:27 AM
  #6  
stangeater01's Avatar
Registered User
iTrader: (125)
 
Joined: Oct 2003
Posts: 569
Likes: 0
From: New Orleans
Default

i went with the BMR the stock torque arm will not work and a new drive shaft will be needed but regardless you can get a shop around your house to build one for apx 250 rather than spending 500 on ones sold on performance web sites.
Reply
Old Jul 12, 2004 | 07:54 PM
  #7  
black 2001Vette,Nightmare's Avatar
On The Tree
 
Joined: Mar 2003
Posts: 137
Likes: 1
From: Texas
Default

FWIW...I have the Mega Raptor 4L60E tranny. I'm going on my third rebuild with it. Can't recommend them to anyone, after what I've gone through.
I know it's not a TH400, but it's the same company. They said this Mega Raptor tranny could withstand 700hp/torque. I don't think so!
I'm trying a different shop for the rebuild this time, and if it goes out on me again, I'm going to Rossler myself!
Good luck!
Reply
Old Jul 12, 2004 | 09:46 PM
  #8  
awesomeame's Avatar
Thread Starter
On The Tree
 
Joined: Jul 2004
Posts: 111
Likes: 0
From: Kitchener, Ontario, Canada
Default

that's good to know, nightmare...that 4l60e was my original plan..before the th400

--matt
Reply
LS1 Tech Stories

The Best V8 Stories One Small Block at Time

story-0

Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?

 Pouria Savadkouei
story-1

Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine

 Verdad Gallardo
story-2

7 Most Reliable High-Performance Engines GM Has Ever Built

 Verdad Gallardo
story-3

Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

 Verdad Gallardo
story-4

6 Common C5 Corvette Failures and What's Involved In Repairing Them

 Pouria Savadkouei
story-5

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

 Verdad Gallardo
story-6

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

 Pouria Savadkouei
story-7

Top 10 Most Powerful Chevy Trucks Ever Made!

 
story-8

Hennessey's New Supercharged Silverado ZR2 Has 700 HP

 Verdad Gallardo
story-9

Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

 Verdad Gallardo
Old Jul 13, 2004 | 10:39 AM
  #9  
stangeater01's Avatar
Registered User
iTrader: (125)
 
Joined: Oct 2003
Posts: 569
Likes: 0
From: New Orleans
Default

i havent bought mine yet i was going to go with the level 4 mega raptor th400, i told them my car has 1200 hp to have a little over kill and they told me this would work for me, i am glad i know how the company is now. i am deffinately going to rossler now.
Reply




All times are GMT -5. The time now is 01:25 AM.

story-0
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?

Slideshow: We take a close look at the ONE and Artidiag 800BT2 diagnostic tools from Topdon and the reasons to buy one over the other.

By Pouria Savadkouei | 2026-05-28 11:05:11


VIEW MORE
story-1
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine

Slideshow: The controversial Ferrari F6 swaps its original flat-12 for a Corvette Z06-derived LT4 V8 and sends power to four rear wheels through a custom-built drivetrain.

By Verdad Gallardo | 2026-05-26 18:23:54


VIEW MORE
story-2
7 Most Reliable High-Performance Engines GM Has Ever Built

Slideshow:These GM engines didn't just make huge power, they survived abuse, boost, track days, and six-digit mileage with a reputation for refusing to quit.

By Verdad Gallardo | 2026-05-21 16:45:27


VIEW MORE
story-3
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

Slideshow: This heavily modified 1971 Camaro mixes classic muscle car styling with a fifth-generation Camaro interior and modern LS3 power.

By Verdad Gallardo | 2026-05-12 18:06:42


VIEW MORE
story-4
6 Common C5 Corvette Failures and What's Involved In Repairing Them

Slideshow: From wobbling harmonic balancers to failed EBCMs, these are the issues that define long-term C5 ownership and what repairs typically involve.

By Pouria Savadkouei | 2026-05-07 18:44:57


VIEW MORE
story-5
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Slideshow: A modern Camaro transformed into a retro icon, this limited-run "Bandit" build blends nostalgia with brute force in a way few revivals manage.

By Verdad Gallardo | 2026-04-21 13:57:02


VIEW MORE
story-6
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Slideshow: Cadillac didn't just crash the high-performance luxury vehicle party, it showed up loud, supercharged, and occasionally a little unhinged...

By Pouria Savadkouei | 2026-04-16 10:05:15


VIEW MORE
story-7
Top 10 Most Powerful Chevy Trucks Ever Made!

Slideshow: Top ten most powerful Chevy trucks ever made

By | 2026-03-25 09:22:26


VIEW MORE
story-8
Hennessey's New Supercharged Silverado ZR2 Has 700 HP

Slideshow: Hennessey has turned the Silverado ZR2 into a 700-hp off-road monster with supercharged V8 power and a limited production run.

By Verdad Gallardo | 2026-03-24 18:57:52


VIEW MORE
story-9
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

Slideshow: A one-off sports car that looks like a vintage Italian exotic-but hides a C6 Corvette underneath-just sold for the price of a new mid-engine Corvette.

By Verdad Gallardo | 2026-03-23 18:53:41


VIEW MORE