YET another tc install question help please

Reply Subscribe

Thread Tools

Search this Thread

Sep 21, 2004 | 11:47 PM

Stroker 1500

Thread Starter

TECH Enthusiast

iTrader: (1)

Joined: Mar 2003

Posts: 613

Likes: 0

From: fresno, ca

YET another tc install question help please

Ok i filled my verter with 1.5 quarts of fluid. i went and put it on the transmission and turned it clockwise as i gently pressed on it, it seated what seemd to be all the way and the verter spun freely but it scrapes up against the transmission... Is that normal? when i bolt the flex plate up will it pull it out to the flaxplate and be how it should be?

thanks

Sep 22, 2004 | 12:15 AM

redaddiction

TECH Junkie

iTrader: (12)

Joined: Jul 2002

Posts: 3,422

Likes: 0

From: Austin, TX

I say bolt it to the flywheel and see if it still scrapes you are only three bolts from that point

Sep 22, 2004 | 12:23 AM

Stroker 1500

Thread Starter

TECH Enthusiast

iTrader: (1)

Joined: Mar 2003

Posts: 613

Likes: 0

From: fresno, ca

alright will do...simple solution just dont want to bolt it up and have a problem

Sep 22, 2004 | 07:07 AM

Kevin Winstead

FormerVendor

Joined: Feb 2002

Posts: 430

Likes: 0

From: Falkner, MS

It is unusual to see a converter rub the transmission. Where does it touch at? Sometimes you'll have one that will lightly touch the transmission pump. As long as it doesn't touch when you bolt the converter to the flexplate, you should be fine. What kind of transmission and converter do you have?
Kevin

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last