Blacker

iTrader: (3)

When I replaced the Yank TT3000 to a Midwest 3600 TC, the transmission leaked afterwards. I thought is was the pump seal. So, I pulled the transmission and replaced the pump seal, pump oring and tailshaft seal. Reinstalled the transmission and the leak was worse. Dropped the transmission again and sent the Midwest TC back to Midwest for a pressure check. They found a pinhole in the cover. The sent me a new converter and I reinstalled it. It seems like a have a small leak from the transmission again. The drips are coming out of the hole in the bottom of the bellhousing, where it meet the motor. Any other ideas?

Blacker

iTrader: (3)

Well, it apears to have been residual fluid when I installed the TC. When, I put the TC on to the input shaft, some fluid leaked out. In the past few days, there has been no more leakage.

Blacker

iTrader: (3)

Well, still leaking. I guess it is time for a Yank TC.