Is there a trans brake for a 4L60E or 4L80E?
11 & 7 Second Clubs
Joined: Oct 2004
Posts: 1,299
Likes: 0
From: Motorhome, Freeways, Truckstops, Pits
Originally Posted by Texas_WS6
That was the question. Please answer and don't just say do a search. Thanks.
We have made them in the past for the 4l60-e, and you get about 3-4 runs till the foward drum blows up! the fix is to install a billet steel foward drum, down side is that the drum cost $2200.00 to make and then the trans is still a POS
and you will still be faster and cheaper with at TH400
GOOD LUCK
and you will still be faster and cheaper with at TH400
GOOD LUCK
12 Second Truck Club
iTrader: (1)
Joined: Jun 2004
Posts: 1,395
Likes: 0
From: The Chicken Ranch, California
Originally Posted by Yank
We have made them in the past for the 4l60-e, and you get about 3-4 runs till the foward drum blows up! the fix is to install a billet steel foward drum, down side is that the drum cost $2200.00 to make and then the trans is still a POS
and you will still be faster and cheaper with at TH400
GOOD LUCK
and you will still be faster and cheaper with at TH400
GOOD LUCK
Originally Posted by Magic Chicken
Would a 4l80 be in the same boat as the 60 when it comes to the brake?
