transgo shift kit
Thread Starter
12 Second Club
iTrader: (2)
Joined: Mar 2004
Posts: 182
Likes: 0
From: Fort Worth, Tx
transgo shift kit I just ordered a transgo kit for my T/A, and I want to find out any problems I may run into before I attempt this installation, any forewarnings or tips would be appreciated.
Joined: Nov 2003
Posts: 6,216
Likes: 236
From: Wichita KS / Rancho San Diego
I would consult with Dana at Pro-Built Automatics on the proper size for the separator plate feed holes, and a couple of other pointers. The instructions are poor, and when you buy a kit from him, he adds to and modifies them.
TECH Fanatic
Joined: Oct 2003
Posts: 1,132
Likes: 0
From: Grand Rapids, Michigan
Originally Posted by RevGTO
I would consult with Dana at Pro-Built Automatics on the proper size for the separator plate feed holes, and a couple of other pointers. The instructions are poor, and when you buy a kit from him, he adds to and modifies them.
Joined: Nov 2003
Posts: 6,216
Likes: 236
From: Wichita KS / Rancho San Diego
Even if you didn't buy the kit from him, you can call him. He's helpful on the phone and explains in detail the modifications he recommends to the kit. The best deal is to call him.
