Transgo Install Question
Thread Starter
TECH Senior Member
iTrader: (7)
Joined: Jun 2004
Posts: 5,446
Likes: 0
From: Central Kentucky
Transgo Install Question Guys, Sorry for another transgo install question. I've done a search and don't believe this has been covered.
Looking over the install instructions for 4l60E, dependant on what 2nd piston you have in you either place a red or white spring in the Accum Bushing and Valve. 2nd piston ending part number is 553 and 554 = red spring in accum bushing. 2nd piston ending part number is 093 and 95-1 = white spring in accum bushing.
I have replaced my 2nd piston with a "Corvette" servo kit from KDS. I am betting it does not have a GM part number on it. What color spring should I place in the Accum Bushing and valve?
TIA for any help.
Looking over the install instructions for 4l60E, dependant on what 2nd piston you have in you either place a red or white spring in the Accum Bushing and Valve. 2nd piston ending part number is 553 and 554 = red spring in accum bushing. 2nd piston ending part number is 093 and 95-1 = white spring in accum bushing.
I have replaced my 2nd piston with a "Corvette" servo kit from KDS. I am betting it does not have a GM part number on it. What color spring should I place in the Accum Bushing and valve?
TIA for any help.
