Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

LT1: ST3500 or PY3600e

Thread Tools
 
Search this Thread
 
Old Mar 28, 2002 | 02:31 PM
  #1  
Shon Herron's Avatar
Thread Starter
TECH Fanatic
iTrader: (25)
 
Joined: Nov 2001
Posts: 1,784
Likes: 0
From: SC
Default LT1: ST3500 or PY3600e

Mods in sig, would the PY help me over the 3500?

Any suggestions/comments appreciated.
Reply
Old Mar 28, 2002 | 04:22 PM
  #2  
Patrick G's Avatar
LS1 Tech Administrator
20 Year Member
Photogenic
iTrader: (14)
 
Joined: Nov 2001
Posts: 8,246
Likes: 34
From: Victoria, TX
Default Re: LT1: ST3500 or PY3600e

You would go slower on motor with the PY3600, but faster if you ran a 150 shot or bigger. What are your future plans?
__________________

2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.

Reply
Old Mar 29, 2002 | 07:13 AM
  #3  
Shon Herron's Avatar
Thread Starter
TECH Fanatic
iTrader: (25)
 
Joined: Nov 2001
Posts: 1,784
Likes: 0
From: SC
Default Re: LT1: ST3500 or PY3600e

Future plans: well after last night is to find a set of B@LLS, I left alot of 60' on the table b/c I am scared of breaking the car.

My plans change all the time, I need to figure the whole picture out and decide, i thought it was to go the TH350 route on the trans but the 4th gear sure is nice!!

This is a race car that i drive to work, eventually it will be all race car, not sure how long that will take though.........
Reply
Old Mar 29, 2002 | 08:25 AM
  #4  
hondakiller's Avatar
TECH Resident
iTrader: (3)
 
Joined: Mar 2002
Posts: 919
Likes: 0
From: wilmington delaware
Default Re: LT1: ST3500 or PY3600e

a guy i know with a juiced lt1 had a py3400e and then he blew his tranny and his converter got rebuilt to a 3800 but hes gone 12.70's on motor and 11.20's on a 150 shot through the stock exhaust manifolds and a stock longblock. he cuts 1.57 60ft's on the spray with hoosiers and a 3.70 gear.

<small>[ March 29, 2002, 08:27 AM: Message edited by: hondakiller ]</small>
Reply




All times are GMT -5. The time now is 05:57 AM.