those with vig3200 and shiftkit, have a looksie
Thread Starter
Launching!
Joined: Feb 2002
Posts: 254
Likes: 0
From: From Houston, Stationed in Norfolk
those with vig3200 and shiftkit, have a looksie i'm installing the shift kit today and would like to know how many washers you guys are using. 2-3? i have a 2000 and TM has been f*cking with me lately. what you's guys gots to say?
thanks,
john <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" />
thanks,
john <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" />
Re: those with vig3200 and shiftkit, have a looksie I used two, and the shifts are great. The part-throttle shifts are much quicker but not harsh by any means, and the WOT shifts are awesome! I will usually scratch the Nitto DR's some on the 1-2 shift. <img border="0" alt="[Burnout]" title="" src="graemlins/burnout.gif" />
__________________
Teching In
Joined: Feb 2002
Posts: 38
Likes: 0
From: NH
Re: those with vig3200 and shiftkit, have a looksie If you are talking about the 2nd accumulator body, I used all 3. I have the same setup and the shifts at part throttle are crisp but not to jerky, at WOT it's a fast firm shift. And thanks to this setup I found out I have a worn torque arm bushing. BANG <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
TECH Resident
Joined: Nov 2001
Posts: 958
Likes: 0
From: Aurora Il
Re: those with vig3200 and shiftkit, have a looksie I had in 3 originally and took one out (pretty easy to do)It was just too jerky for my taste. 2 is still a nice shift removing one just took the edge off.
