Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

Who's got a ST3500?

Thread Tools
 
Search this Thread
 
Old Apr 28, 2002 | 04:18 PM
  #1  
horist's Avatar
Thread Starter
TECH Senior Member
 
Joined: Nov 2001
Posts: 7,036
Likes: 1
From: Lake Zurich, IL
Default Who's got a ST3500?

Just curious. I have one in my car and the best I can do is a 12.9@104 w/a low 1.9 or high 1.8 second 60'

Granted i'm not exactly the smallest guy in the world, plus it's a Trans Am with full interior so it's heavy as hell.

I've only cut a 1.8 60' once (still learning on the car). I just put HAL shocks all around and HAL front springs in, what kinda 60' do you think I'll be able to cut (this is all on a Nitto 555R)
Reply
Old Apr 28, 2002 | 05:19 PM
  #2  
Patrick G's Avatar
LS1 Tech Administrator
20 Year Member
Photogenic
iTrader: (14)
 
Joined: Nov 2001
Posts: 8,246
Likes: 34
From: Victoria, TX
Default Re: Who's got a ST3500?

I've cut 1.62 on Nittos with a 3800 lb race weight. Convertibles with roll cages are heavy!
__________________

2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.

Reply
Old Apr 28, 2002 | 10:04 PM
  #3  
Ragtop 99's Avatar
TECH Senior Member
iTrader: (7)
 
Joined: Nov 2001
Posts: 9,491
Likes: 1
From: Bethesda, MD
Default Re: Who's got a ST3500?

My best was a 1.68 on nittos with my pig back when I had a ST 3500. Typically, I cut low 1.7x with bolt-ons.
Reply
Old Apr 28, 2002 | 10:29 PM
  #4  
BIG PD's Avatar
TECH Apprentice
 
Joined: Feb 2002
Posts: 363
Likes: 0
From: tega cay, SC
Default Re: Who's got a ST3500?

1.7's on nitto's when i didn't have the cam.
Reply




All times are GMT -5. The time now is 08:39 PM.