Where to set shift points?
Thread Starter
2nd fastest 5.3 ECSB
iTrader: (14)
Joined: Oct 2005
Posts: 26,691
Likes: 0
From: NorCal
Where to set shift points? Currently my shift points are all at 6400 rpm. My 1/4 mile trap is 94 mph + holding second.
Where would be the best setting for my shift points with peak Hp @ 5800 and peak Tq @ 4900? Also running the TT3000 converter.
Where would be the best setting for my shift points with peak Hp @ 5800 and peak Tq @ 4900? Also running the TT3000 converter.
i'd set my shiftpoint a HAIR over whatever rpm it starts falling after peak. it appears that your setup begins to fall 6,300...so i think your current shiftpoint is about as good as it's gonna get.
Thread Starter
2nd fastest 5.3 ECSB
iTrader: (14)
Joined: Oct 2005
Posts: 26,691
Likes: 0
From: NorCal
Hey thanks!
Yeah the 1-2 leaves me @ 4000 rpm so I dont want to drop any lower i guess. Rick bumped up the speed a small bit, not sure but that may have given me another 50 rpm.
Yeah the 1-2 leaves me @ 4000 rpm so I dont want to drop any lower i guess. Rick bumped up the speed a small bit, not sure but that may have given me another 50 rpm.
