Transgo
Transgo I just got the tranny rebuilt. Sorta fried the 2nd band. I got it rebuilt ,with the wider band and the raybestos Zpack and I had them put in one of thoses transgo shift kits. 2nd gear now hits like a brick **** house. I better start looking for a 12 bolt. Damn I fixed the bitch too good this time. 
Originally Posted by NC98Z
2nd gear now hits like a brick **** house.
TECH Resident
Joined: May 2006
Posts: 969
Likes: 119
If the transmission hits to hard on the part throttle 1-2 shift, most likely you have all 3 spacers in the 1-2 accumulator. Take all of the spacers out of the accumulator. This should soften the 1-2 shift quite a bit, and is much easier on the geartrain, your WOT shift should be fine.
Originally Posted by PBA
If the transmission hits to hard on the part throttle 1-2 shift, most likely you have all 3 spacers in the 1-2 accumulator. Take all of the spacers out of the accumulator. This should soften the 1-2 shift quite a bit, and is much easier on the geartrain, your WOT shift should be fine.
I like mine with no spacer's it still shifts very fast but not near as hard on part throttle shifts much more comfortable riding around town and it will not change the wot shift.
