Trans Go guys, I have a ?
Trans Go guys, I have a ? With the level 2 washer, how hard does it shift part throttle? Mine is way too hard for me. It will squeek the tires on the 1-2 shift at 2200RPMs. The other shifts are nice; firm, but not harsh. The tranny shop told me to drive it a week and see if the computer will adjust, if not I will take it back in and have them mess with it. I have the Vig3200 and 3.42s.
Thanks,
Brandon
Thanks,
Brandon
Re: Trans Go guys, I have a ? </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Casper9T9:
<strong>With the level 2 washer, how hard does it shift part throttle?</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Right there...
<strong>With the level 2 washer, how hard does it shift part throttle?</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Right there...
TECH Enthusiast
Joined: Feb 2002
Posts: 636
Likes: 0
From: HTownRacing.com, TX
Re: Trans Go guys, I have a ? i also have the 3200 with the lvl 2 washer setting on the 3.42's and i find every shift is just firm. part throttle it doesnt really "jerk" but simply you feel it grinding the gears as the clutches push out of one and into the other. i enjoy the open exhaust on the 1-2 shift as it gets annoyingly loud and raspy with the wide open borla, headers - no cats.
are you still on street tires b/c at times those will give the impression of a hard shift which in reality is just due to a variety of wheel hop, and i would recommend a softer drag tire in which case.
are you still on street tires b/c at times those will give the impression of a hard shift which in reality is just due to a variety of wheel hop, and i would recommend a softer drag tire in which case.
